bay plate_thickness thk Platesetter_3244 Platesetter_VLF This state parameter is not normally modified with the 'set' command. The firmware uses this parameter for internal 'housekeeping'. Nominal thickness of the plates loaded into bay. If this parameter is incorrect by more than about 20 microns, the image scale may be noticibly incorrect in the around drum direction. integer
  • 0
    •
  • 0 to 1000 [microns]
    •      state
  • ..\..\ShowAllErrors.htmFirmware 0 Error Index
  • ..\..\ShowAllCommands.htmFirmware 0 Command Index
  • ..\..\ShowAllNVS.htmFirmware 0 NVS Index
    •  Updated: Wed Jul 16 19:36:39 2008 PST